|
#1
|
|||
|
|||
Hey 4legs
Hey this might be of interest to you, it is a sheet designed to lay at SP using gruss you can set to auto so it will lay all races one after each other or manual for race to race laying.
|
#2
|
|||
|
|||
Hi Shaun - thank you for that. I also just read your reply on Gruss & sent you an email!. I will try yours tomorrow; however that is virtually the same as mine; and when I run it I get an API-Error. But thinking I have been running under excel 2003 - even though I do have office 2010. I have tried it on 2 machines laptop visa and desktop/windows 7 and I have even bypassed my modem and ran it on a portable Broad bad modem - still same results - so very puzzling. Never mind I will keep trying. I will let you know tomorrow the results I get with yours.
Once again thanks for the kind offer - and I will use 2010 tomorrow. Regards, Fred |
#3
|
||||||||||||
|
||||||||||||
Hi Shaun - I was just going through your spread sheet and comparing it to mine and I did notice 2 things that are different. I searched the user manual and could not find how to adjust, but I have a feeling they may be relevant. These are:
Especially the IR Delay. Could you please point me to how I set these. Apart from these we are virtually the same. Many thanks ... Fred |
#4
|
|||
|
|||
I think those 2 cells are only active when betting is enabled the J3 i think is the number od races left from the pick list and the L3 is in running delay because the race has not started it would be a delay of 1 second when the race starts i think you would find it changes to 5 as there is a 5 second in running rule, you would have to confirm this with the boys from gruss.
As to your main problem you have me stumped as i have provided sheets for excel 2003 and up with no issues apart from the normal comparability ones. |
#5
|
|||
|
|||
Thanks Shaun - I should have posted this to the Gruss forum - I will get these forums worked out in time. I have posted it there this morning. My problem must be something to do with my environment - but no idea what. Never mind will keep working away at it. Fred
|
#6
|
|||
|
|||
Np mate, there are a few of us on here that use that program so we could help at times if needed.
|
Thread Tools | Search this Thread |
Display Modes | |
|
|