|
|
To advertise on these forums, e-mail us. |
|
|
Thread Tools | Search this Thread | Display Modes |
#41
|
|||
|
|||
"If you incude unplaced overall the figures show a 8.7% profit but you drop the bets to 1/5 of action".
Sorry to bother you Wesmip, do u mean by adding a further filter - ie unplaced at horses last start, the profit improves to 8.7% Cheers Tony |
#42
|
|||
|
|||
Yes thats right. But you only have 1/5 the bets. So it depends on whether POT or P is your primary objective.
If you lose 80% of the bets for only a 4% incrase in profit over turnover is it worth it. 1000 at 4% profit = $40 200 at 8% profit = $16 Which do you prefer ? |
#43
|
|||
|
|||
Quote:
__________________
Stix .......Giddy Up..... !! |
#44
|
|||
|
|||
Stix,
Short answer is no. I have been trialling so many new systems lately on a new angle that I just have not had time. I will look into it by this weekend and get back to you. |
#45
|
|||
|
|||
Quote:
__________________
Stix .......Giddy Up..... !! |
#46
|
|||
|
|||
Hi Guys,
As I mentioned earlier in another post I am quite a new punter, I have been reveiwing this thread and really like the methadocial nature of this selection system. I have attempted to prepare the selections myself, however I have one question that would be helpfull if you could address? When using the neural seetins, I have set the CP to 5 and everything else to 0 is this correct? Or if not are you able to advise what settings you are using for this method? Furthermore what are you suppose to do when the Uni TAB top rater is teh same? Thanks in advance. |
#47
|
|||
|
|||
Quote:
Yes that is one way to do it. Or you can just look at the CP column without changing the settings. Quote:
Only 1 top unitab rating should amtch the top cp. In the results if there were 2 cp's that matched 2 top unitab ratings then they were both included (but not sure if this ever happened). |
#48
|
|||
|
|||
Thanks Wesmip.
It appeares yesterday there was one selection which ran second at Sale Race 7 no 1. One further question if you dont mind, I notice that if you change the other columns in the R&S worksheet it changes the FR, Is this method based on using the default FR or am I meant to adjust that somehow? Thanks again! |
#49
|
|||
|
|||
default only
|
Thread Tools | Search this Thread |
Display Modes | |
|
|